Bike Trials Evolution

Be part of this evolution, send us your bikes' profiles!
Home   About   Contact   Forum   TrashZen  

All the ‘2015’ Archives

2015 – Inspired Console 24″, custom built

April 25, 2016 By: Julien TZ Section: 2015, BikeTrials Gallery

Dman’s custom built Inspired Console, one of the pimpest bikes ever.

  • 2015 Inspired Console Frame and Forks, powder coated grey.
  • FSA Orbit MX Headset, black.
  • BBB Carbon fibre Headset spacers.
  • Da Bomb Tactic handlebars, powder coated grey.
  • BBB 90×35 stem, removed logo, powder coated black, with Stan Ti bolts.
  • Sram, Guide Ultimates, all Ti bolts, Carbon Fibre lever blades, Centreline x2 rotors, Stan Ti, rotor, caliper and adaptor bolts. Hope brake adaptors, black. Goldfren, SW33 ceramic carbon compound pads.
  • Cult AK grips.
  • Inspired 15mm through axle.
  • Wheels, Hope pro 4 hubs orange, black spokes, orange nipples, Spank Subrosa Evo rims, Tartybikes wheel builds, Continental tyres, maxxis inner tubes, Stan Ti rear hub bolts, Ti bullet dust caps.
  • Cult Dak v2 seat, orange logo.
  • Thermalite seat post, orange. Stan Ti seat clamp bolt.
  • Raceface Turbine Cinch cranks, 30mm through axle, Cinch spider, Inspired V2 Bashring, Aerozine Bashring bolts orange, Middleburn 22t Chainring, BSD Forever chain, RF BSA30 Cinch BB, RF crank boots orange, Nukeproof Proton, Mag Ti pedals, Trialtech 16t sprocket, hope single speed spacers.

2015 – Monty M5 Carbon

February 05, 2016 By: Julien TZ Section: 2015, BikeTrials Gallery

Heino Thanheiser’s Monty M5 Carbon bike, a super light assembly at 5Kg and 830grams.

2015 – Hashtagg 26″ Open Space

September 25, 2015 By: Julien TZ Section: 2015, BikeTrials Gallery

Vincent Hermance’s Hashtagg Open Space

  • Aluminium frame (7005 T6)
  • Wheelbase: 1090mm
  • Chainstays: 377mm
  • BB Height: +70

2015 – Inspired Console 24″ bike

July 14, 2015 By: Julien TZ Section: 2015, BikeTrials Gallery

The full Cr-moly Inspired Console offers me a good re-introduction to riding trials on a “normal-looking, normal-feeling” bike, with plenty of sweet moves and flow to enjoy.
It is like going back to the old days, but on a much more solid bike with a modern street geometry, and tons of new tricks to learn.


Frame: Inspired Console Cr-moly
Fork: Inspired Console.
Bars: Inspired Arcade High-Rise Riser
Stem: Trialtech Sport, 90mm x 35° rise
Crank: Inspired Arcade, 3-piece steel, 175mm
Bottom bracket: Inspired Arcade.
Pedals: Trialtech Race Platform.
Brakes: SRAM DB5 180mm Disc.
Seat: Inspired Pivotal
Rims: Inspired Arcade
Hubs: Triatech Disc
Chain Tensioner: Inspired Console, Cr-moly Steel
Tyres: Maxxis Holy Roller 24×2.4″.
Gear Ratio: 22/16 (quite more than on a natural trials comp bike)
Wheelbase in this current setting: 995mm (95mm shorter than my Gu).
Chainstays: 362mm (18mm shorter)
Bottom bracket height: +25mm (45mm lower than my comp bike).

2015 – ONNIT J2 20″ bike

March 09, 2015 By: Julien TZ Section: 2015

The ONNIT J2 20″ trials bike as presented on

Wheelbase: 985mm

BB height: +85mm

Chainstays: 350mm

2015 – Monty Kamel 221 Pro Race

March 09, 2015 By: Julien TZ Section: 2015

The Monty Kamel 221 Pro Race as shown on TribalZine

Wheelbase: 1008mm

Chainstay: 349mm

BB Height: +85mm

2015 – Kabra F26 HID

December 19, 2014 By: Julien TZ Section: 2015

The Kabra F26 Hid 2014/15 from, with Aluminium 7005 T6 frame, Black or Silver.

  • Disc 160 mm or Hidraulyc brake mount.
  • Racing Line/Magura HS33/Magura HS11 customizable.
  • Wheelbase: 1085 mm
  • Chainstay: 380mm
  • BB Height: +65mm
  • Weight starts at 8.4Kg